مقاله Preparation of ceramic matrix nanocomposites using NiدرCo

مقاله Preparation of ceramic matrix nanocomposites using NiدرCo coated Al2O3 nanoparticles فایل ورد (word) دارای 10 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد مقاله Preparation of ceramic matrix nanocomposites using NiدرCo coated Al2O3 nanoparticles فایل ورد (word) کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Preparation of ceramic matrix nanocomposites using NiدرCo coated Al2O3 nanoparticles فایل ورد (word) ،به هیچ وجه بهم ریختگی وجود ندارد
بخشی از متن مقاله Preparation of ceramic matrix nanocomposites using NiدرCo coated Al2O3 nanoparticles فایل ورد (word) :
سال انتشار: 1391
محل انتشار: اولین همایش بین المللی و ششمین همایش مشترک انجمن مهندسی متالورژی ایران
تعداد صفحات: 10
چکیده:
New classes of advanced ceramic matrix nanocomposites based on Ni-Co coated Al2O3 nano particles,are introduced in this article. This kind of nanocomposites can be used as the catalysts, electromagnetic wave absorbing materials, contactors, switches and etc, because of their excellent properties such as good electrical and thermal conductivities and excellent corrosion and wear resistance. Al2O3–Ni-Co nanocomposite powders were fabricated by Electroless plating of Ni-Co on Al2O3 particles. Bulk samples of nanocomposites were prepared under subsequent cold pressing and sintering processes of thepowders. The results shows that, by growing of copper on the surface of the cu nucleies, by electroless deposition, a continuous Ni-Co shell within about 20nm thickness are formed around the Al2O3. Uniaxially cold pressure of 400Mpa and sintering at 1200°C leads to the formation of dense and uniform distributed nanocomposite samples.

کلمات کلیدی :
» نظر