سفارش تبلیغ
صبا ویژن

مقاله EVALUATION OF CORROSION INHIBITORS FOR CARBON STEEL IN A S

 

برای دریافت پروژه اینجا کلیک کنید

مقاله EVALUATION OF CORROSION INHIBITORS FOR CARBON STEEL IN A SEAWATER INJECTION PUNT IN KUWAIT فایل ورد (word) دارای 9 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله EVALUATION OF CORROSION INHIBITORS FOR CARBON STEEL IN A SEAWATER INJECTION PUNT IN KUWAIT فایل ورد (word) کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله EVALUATION OF CORROSION INHIBITORS FOR CARBON STEEL IN A SEAWATER INJECTION PUNT IN KUWAIT فایل ورد (word) ،به هیچ وجه بهم ریختگی وجود ندارد


بخشی از متن مقاله EVALUATION OF CORROSION INHIBITORS FOR CARBON STEEL IN A SEAWATER INJECTION PUNT IN KUWAIT فایل ورد (word) :

سال انتشار: 1378

محل انتشار: ششمین کنگره ملی خوردگی ایران

تعداد صفحات: 9

چکیده:

Six corrosion inhibitors have been evaluated for carbon steel in seawater undcr downhole conditions. Thc corrosion rates of carbon steel in the absence and presence of inhibitors have heen determined using the linear polarizarion resistance (LPR), weight loss method and electrochemical impedance spectroscopy (EIS). The corrosion rates of carbon steel that were tletermined by rhe LPR method were conducted for specimens exposed to uninhibilcd and inhibited sseawaler under downhole conditions using a 3 litre volume Hastelloy C-22 autoclave, A corrosion meter was used for corrosion rate dctcrrrmination. the weight moss method was based on the wheel test method, which consisted of a rotating wheel machine with 24 compartments of 200 ml glass bottles. test specimens and varous concenttations of inhibitions were placed in these bottles for 14 days after witch the weight loss was determined. the EIS method was performed to determie the inhibitor that has the abitity to form a protective film pf the surface of the steel. the most effeective corrosion inhibitor found was on amide-based inhibitor at a corcentration of 5 to 10 ppm.

 

 

برای دریافت پروژه اینجا کلیک کنید
» نظر