مقاله Simple Methodology to Create Master Curves for Stiffness of Asphalt Mixtures فایل ورد (word) دارای 8 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد مقاله Simple Methodology to Create Master Curves for Stiffness of Asphalt Mixtures فایل ورد (word) کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Simple Methodology to Create Master Curves for Stiffness of Asphalt Mixtures فایل ورد (word) ،به هیچ وجه بهم ریختگی وجود ندارد
بخشی از متن مقاله Simple Methodology to Create Master Curves for Stiffness of Asphalt Mixtures فایل ورد (word) :
سال انتشار: 1388
محل انتشار: هشتمین کنگره بین المللی مهندسی عمران
تعداد صفحات: 8
چکیده:
In road engineering, most of the mechanistic design methodologies for asphalt pavements are based on estimating the structural response of the pavement, i.e. the critical stresses/strains due to a certain design load. The critical strains, which are generally considered, are the horizontal flexural tensile strain at the bottom of the asphalt layer and the vertical compressive strain at the top of the subgrade. For the calculation of the stresses/strains, use is made of linear elastic multi-layer program like BISAR or viscoelastic multi-layer programs e.g. Kenlayer and VEROAD. Typically the stiffness modulus of asphalt concrete increases with decreasing temperature and increasing loading frequency. By shifting the stiffness modulus versus loading time relationship for various temperatures horizontally with respect to the curve chosen as reference, a complete modulus-time behavior curve at a constant, arbitrary chosen, reference temperature Tref can be assembled. This Paper describes a methodology to construct the stiffness master curves for Asphalt Mixture. The model described is based on physical observations and it is believed to give ‘reasonable’ estimates for the mix stiffness at any arbitrary loading frequency. The technique of the determination of the master curve is based on the principle of time-temperature correspondence, or thermo-rheological simplicity. The experimental (stiffness) data are plotted versus log frequency or log loading time and by choosing a reference temperature the data of the other temperatures are shifted horizontally until they fit the curve for the reference temperature. Then the data obtained at the other temperatures are shifted until they fix the extended reference curve. Master curve can be constructed by fitting a sigmoid function using non-linear least square regression techniques. The shifting will be done using an experimental approach by solving shift factors simultaneously with the parameters of the model without the need to assume any functional form for the shift factor equation. Based on the material presented in this paper, has been founded that a sigmoid model can best describe the master curve of mix stiffness of asphalt concrete. This model also can explain the physical behavior of asphalt concrete.
کلمات کلیدی :
»
نظر
